Galvanized pipe

FOB Price

US $650.0010 - 40,000 metric ton

US $350.0040,001 - 999,999 metric ton

group name: Post

Min Order: 10 metric ton

brand name: TYTSTEEL

Nearest port for product export: TIANJIN XINGANG PORT, QINGDAO PORT, SHANGHAI PORT, NINGBO PORT

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, CIP, CPT, DDP, DDU

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow

update time: Tue, 22 Apr 2014 14:42:04 GMT

contact supplier

Paramtents

Standard BS, GB, ASTM
Standard BS 1387, BS 1139, BS 4568, BS EN 39, GB/T 17396-1998, ASTM A53-2007
Grade 16Mn, A53-A369, Q195-Q345
Grade 16Mn, A53(A,B), Q235, Q195, Q215
Thickness 0.45 - 8 mm
Section Shape Round
Outer Diameter 21.3 - 273.1 mm
Secondary Or Not Non-secondary
Application Structure Pipe
Technique Hot Rolled
Certification ISO9001-2000
Surface Treatment Galvanized
Special Pipe Thick Wall Pipe
Alloy Or Not Non-alloy
Standard BS, GB, ASTM
Thickness 0.45-8mm
Outer Diameter 21.3-273.1
Grade Q195/Q215/Q235/Q345/st33

Packging & Delivery

Min Order10 metric ton

Briefing

Galvanized pipe
surface treat; galvanized or oil painting
specification 1/2''-10''
grade Q195 Q235 Q 345 Q21

Detailed

Galvanized pipe

1).Specification:1/2" to 10"
2).Grade:Q195/Q215/Q235/Q345/st33
3).O.D.:1/2''-10''(21.3mm-273.3mm)
4).W.T.:0.75mm-8mm
5).Length:3m-10m

Nominal size	Out diameter	Thickness
inch	mm	mm
1/2"	21.3	1-2.8
3/4"	26.9	1-2.8
1"	33.7	1-3.2
11/4"	42.4	1-3.5
11/2"	48.3	1.5-3.5
2"	60.3	1.5-3.5
21/2"	76.1	1.5-3.75
3"	88.9	4
4"	114.3	4
5"	139.7	4
6"	168.3	4.5
8"	219.1	4.0-6.0

Galvanized pipe

TOLERANCE
:a) On Specified OD + 0.5mm (Ovality 0.5mm)
:b) The Inside Diameter of ubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm.
:c) On Wall thickness -10%
:d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass.

2. ENDS
: Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.

3. PROPERTIES
:a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%.
:b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum).

4. FLATTENING TEST WELD AT 90 DEGREES (COLD)
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.
b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube.

5. STRAIGHTNESS
: 1 in 500 (In 1 meter it should not exceed 3mm).

6. ZINC COATING
: Minimum local coating thickness on the outside surface 40 microns.
(GALVANIZING)

7. MARKING
: a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe.
b) We can do online stencilling as per customer needs.

8. PACKING
: Hexagonal type.

9. MILL TEST CERTIFICATE
:We can issue a MTC, certifying that the tubes supplied comply with this Standard.