US $980.0010 - 40,000 ton
US $750.0040,001 - 999,999 ton
Paramtents
Standard BS, GB, ASTM
Standard BS 1387, BS 1139, BS 4568, BS EN 39, GB/T 3091-2001, ASTM A53-2007
Grade A53-A369, ST35-ST52, Q195-Q345
Grade A53(A,B), St37, St52, St42, Q235, Q345, Q195, Q215
Thickness 1.2 - 9 mm
Section Shape Round
Outer Diameter 20 - 273 mm
Secondary Or Not Non-secondary
Application Electrical,Fluid,construction scaffolding and conduct pipe
Technique ERW
Certification ISO9001:2000
Surface Treatment Galvanized
Alloy Or Not Non-alloy
Length 4 to 12meter
Zinc coating content 260-350 g/m2
Brand TYSTEEL
Life Over 10 years
Surface treatment Galvanized
Ends Screwed both ends and complete with one solid coupling(socket)
Usage Electrical,water transportation and conduct pipe
Packging & Delivery
Min Order10 ton
Briefing
Detailed
ASTM A53 SCHEDULE 40 GRADE B | |||||||||||||
Outside Dia. Of Black /Galvanized tube | Weight of Black /Galvanized tube | ||||||||||||
SIZE | Minimum | Maximum | Wall Thickness | Plain Ends | Secrewed & Socketed | Pieces | |||||||
INCH | NB(mm) | INCHES | mm | Inches | mm | Inches | mm | lb./Ft. | Kg./Mtr. | lb./Ft. | Kg./Mtr. | per bundle | Factory standard |
1/2'' | 15 | 0.809 | 20.9 | 0.856 | 21.7 | 0.109 | 2.77 | 0.85 | 1.27 | 0.85 | 1.27 | 120 | 217 |
3/4'' | 20 | 1.020 | 26.3 | 1.070 | 27.1 | 0.113 | 2.87 | 1.13 | 1.69 | 1.13 | 1.69 | 84 | 169 |
1'' | 25 | 1.280 | 33.0 | 1.330 | 33.8 | 0.133 | 3.38 | 1.68 | 2.50 | 1.68 | 2.50 | 60 | 127 |
11/4'' | 32 | 1.630 | 41.8 | 1.680 | 42.6 | 0.140 | 3.56 | 2.27 | 3.39 | 2.28 | 3.40 | 42 | 91 |
11/2'' | 40 | 1.870 | 47.9 | 1.920 | 48.7 | 0.145 | 3.68 | 2.72 | 4.05 | 2.73 | 4.06 | 36 | 91 |
2'' | 50 | 2.350 | 59.7 | 2.400 | 60.9 | 0.154 | 3.91 | 3.65 | 5.44 | 3.68 | 5.46 | 26 | 37 |
21/2'' | 65 | 2.850 | 72.3 | 2.900 | 73.7 | 0.203 | 5.16 | 5.79 | 8.63 | 5.82 | 8.67 | 18 | 37 |
3'' | 80 | 3.460 | 88.0 | 3.530 | 89.8 | 0.216 | 5.49 | 7.58 | 11.29 | 7.62 | 11.35 | 14 | 37 |
31/2'' | 90 | 3.960 | 100.6 | 4.040 | 102.6 | 0.226 | 5.74 | 9.11 | 13.57 | 9.20 | 13.71 | 12 | 19 |
4'' | 100 | 4.450 | 113.2 | 4.540 | 115.4 | 0.237 | 6.02 | 10.79 | 16.07 | 10.89 | 16.20 | 10 | 19 |
5'' | 125 | 5.510 | 139.9 | 5.620 | 142.7 | 0.258 | 6.55 | 14.62 | 21.77 | 14.81 | 22.10 | 7 | 19 |
6'' | 150 | 6.560 | 166.6 | 6.690 | 169.98 | 0.280 | 7.11 | 18.97 | 28.26 | 19.18 | 28.60 | 7 | 19 |
1.TOLERANCE: | |||||||||||||
a)On Thickness: The minimum wall thickness at any point shall be not more than 12.5% under the nominalwall thickness specified. | |||||||||||||
b)On Diameter:For NPS 11/2" & under at any point shall not vary more than +/- 0.4mm. For NPS 2" & above shall not vary more than +/-1% from the standard specified. | |||||||||||||
c)On Weight: The weight of the pipe shall not vary by more than +/- 10% of the specified value. | |||||||||||||
2.ENDS: | |||||||||||||
a)11/2" and below size - End finish shall be at the option of manufacturer. Nominally square cut with theaxis of tube and free from excessive burrs. | |||||||||||||
b)2" and above size - Bevelled with ends bevelled to an angle of 30 degrees +5/-0 measured from a line perpendicular to the axis of the pipe with a root face of 1.6mm +/-0.8mm. | |||||||||||||
3.INTERNAL DEBEADING: From size 2" & above internal beads can be completely removed. | |||||||||||||
4.PROPERTIES:a) Chemical = (Maximum) C - 0.30%, Mn - 1.20%, S - 0.045% & P - 0.050%, Cu-0.40%, Ni-0.40%, Cr-0.40%,Mo-0.15%, V-0.08%, (Cu+Ni+Cr+Mo+V = 1.0% max) | |||||||||||||
b) Mechanical (Minimum) = UTS - 415 N/mm2, YS - 240 N/mm2 & %Elongation 19 to 25% . | |||||||||||||
5.BEND TEST (COLD): Applicable to tubes upto and including nominal size of 50mm. | |||||||||||||
a)When ordered for close coiling bend upto 180 degrees around a cylindrical mandrel, the Dia of which is 8 times the OD of pipe. | |||||||||||||
b)Bend upto 90 degree around a cylindrical mandrel, the dia of which is 12 times the OD of pipe .No cracks at any portion and no open in the weld. | |||||||||||||
6.FLATTENING TEST (COLD): Applicable to tubes greater than nominal size of 50mm weld located 0 / 90 degrees from the line of direction of force | |||||||||||||
a)During the 1st step, which is atest for ductility of the weld, no cracks or breaks in the inside or outside surfaces at the weld shall occur until the distance between the plates is less than two thirds of the specified diameter of the pipe. | |||||||||||||
b)During the 2nd step, no cracks or breaks on the inside or outside surfaces away from the weld, shall occur until the distance between the plates is less than one third of the specified outside diameter of the pipe but is less than five times the wall thickness of the pipe. | |||||||||||||
c) During the 3rd step, which is a test for soundness, flattening shall be continued until the test specimen breaks or the opposite walls of the pipe meet. Evidence of laminated or unsound material or of incomplete weld that is revealed by the flattening test shall be cause for rejection. | |||||||||||||
7.LEAK TIGHTNESS TEST:a) Online NDT (Eddy current ) b) Hydro test at a pressure of 700 PSI to 2500 PSI | |||||||||||||
8.BLACK VARNISH:Tubes are uniformly varnished externally over their full lengths. | |||||||||||||
9.ZINC COATING:Average 3000 Gm/M2, but one side should not be less than 260 Gm/M2. Free from bare spots,black spots,(GALVANIZING) rough,overcoating,peel off or any other surface defects. | |||||||||||||
10.THREADING:For 1/2" to 3/4" - 14 TPI, 1" to 2" - 11.5 TPI and 21/2" to 6" = 8 TPI.Check with standard ASTM ring and plug gauges. | |||||||||||||
11.MARKING:We can do online by stencilling as per this standard & as per customer needs at one meter interval. | |||||||||||||
12 PACKING:Hexagonal type. | |||||||||||||
13.MILL TEST CERTIFICATE:We can issue a MTC, certifying that the tubes supplied comply with this ASTM A 53 Standard. |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.