EN39 galvanized scaffolding pipe

FOB Price: US $650.0010 - 5,000 ton

group name: Hot dip galvanized round steel pipe(tube)

Min Order: 10 ton

brand name: TYTSTEEL

model: 47.8-48.3mm

Nearest port for product export: TIANJIN XINGANG PORT, QINGDAO PORT, SHANGHAI PORT, NINGBO PORT

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, CIP, CPT, DDP, DDU

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow

update time: Fri, 06 Mar 2015 08:55:15 GMT

contact supplier

Paramtents

Standard EN39
Material Q195-235B

Packging & Delivery

Min Order10 ton

Briefing

1.OD:40NB 47.8mm
2.W.T:3.2/4.0mm
3.pacakage:in bundles with blue waterproof cloth

Detailed

EN39-2001 Galvanized scaffolding pipe

Type			Outside Dia. of Black /Galvanized Tube						Weight of Black/ Galvanized Tube
	Size		Minimum		Maximum		Wall thickness		Plain ends		Pieces
	NB(mm)	inches	mm	inches	mm	inches	mm	inches	Kg/ft	Kg/meter	Per bundle
3	40	11/2	47.8	1.882	48.8	1.921	3.2	0.126	1.090	3.56	61
4	40	11/2	47.8	1.882	48.8	1.921	4.0	0.157	1.332	4.37	50

1. TOLERANCE:

a) On Specified OD + 0.5mm (Ovality 0.5mm)
b) The Inside Diameter of ubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm.
c) On Wall thickness -10%
d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass.
2. ENDS:

Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.
3. PROPERTIES:

a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%.
b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum).
4. FLATTENING TEST WELD AT 90 DEGREES (COLD):
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.
b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube.
5. STRAIGHTNESS:

1 in 500 (In 1 meter it should not exceed 3mm).
6. ZINC COATING:

Minimum local coating thickness on the outside surface 40 microns.
(GALVANIZING)
7. MARKING:

a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe.
b) We can do online stencilling as per customer needs.
8. PACKING:

Hexagonal type.
9. MILL TEST CERTIFICATE:

We can issue a MTC, certifying that the tubes supplied comply with this Standard.