US $950.0020 - 40,000 metric ton
US $700.0040,001 - 999,999 metric ton
Paramtents
Standard BS, GB, ASTM
Standard BS 1387, BS 1139, BS 4568, BS EN 39, BS 31, GB/T 3091-2001, GB/T 13793-1992, ASTM A53-2007, ASTM A53M-2007
Grade 16Mn, ST35-ST52, Q195-Q345
Grade 16Mn, St37, St52, St42, Q235, Q345, Q195, Q215
Thickness 1.2 - 15 mm
Section Shape Round
Outer Diameter 21.3 - 273.1 mm
Secondary Or Not Non-secondary
Application Oil Pipe
Technique ERW
Certification ISO90001-2008
Surface Treatment Galvanized
Alloy Or Not Non-alloy
Technique Welded
Packging & Delivery
Min Order20 metric ton
Briefing
Detailed
HOT DIP GALVANIZED STEEL PIPE / GALVANIZED STEEL PIPE
/ GALVANIZED PIPE / STEEL PIPE PLAIN ENDS
1).Spec:1" to 10"
2).Grade:Q195/Q215/Q235/Q345
3).O.D.:1/2''-10''(20mm-250mm)
4).W.T.:1.2-15mm
5).Length:3m-12m
We produce erw steel pipe and galvanized steel pipe
according to standard BS1387,DIN2440 ,bs21threads ,socket .
DN15MM TO DN150MM, thickness class: light, medium, heavy
1.TOLERANCE:a) On Thickness Light Tubes = + Not Limited, - 8%. Medium & Heavy tubes = + Not Limited , -10% .
:b) On Mass for quantities of 150 Mtr., and over of one size =+/- 4%, for single tube =+10% / -8%.
2. ENDS: Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.
3. PROPERTIES:a) Chemical = (Maximum) C - 0.20%, Mn - 1.20%, S - 0.045% & P - 0.045% .
:b) Mechanical = UTS - 320 to 460 N/mm2, YS - 195 N/mm2 (minimum) & %Elongation on 5.65 S0 -
20% (minimum).
4. BEND TEST (COLD): Applicable to tubes upto and including nominal size of 50mm.
a) For black tubes bend upto 180 degrees around a cylindrical mandrel, the Dia of which is 6 times the OD of pipe.
b) For Galvanized pipe bend upto 90 degree around a cylindrical mandrel, the dia of which is 8 times the OD of pipe .
Tubes shall withstand the test without showing any signs of fracture or failure.
5. FLATTENING TEST : Applicable to tubes greater than nominal size of 50mm.
(COLD) a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.
b) For Material: Distance between the platens, measured under load is not greater than 60% of the OD of tube.
6. LEAK TIGHTNESS TEST: a) Online NDT (Eddy current )
b) Hydro test at a pressure of 50 bar.
7. BLACK VARNISH: Tubes are uniformly varnished externally over their full lengths.
8. ZINC COATING : 55 to 70 Microns, uniformity of coating to withstand 4, one minute dips in copper sulphate solution. (GALVANIZING)
9. THREADING: For 1/2" to 3/4" - 14 TPI and from 1" to 6" - 11 TPI
With 2 colour bands one near each ends of 50 mm width (A class - Brown, B Class - Blue & C Class - Red).
Check with standard BS ring and plug gauges.
10. MARKING:
a) We can emboss mill sign "UTP/Spec." online at every one meter interval over the length of pipe.
b) We can do online stencilling as per customer needs.
11 PACKING: Hexagonal type.
12.MILL TEST CERTIFICATE: We can issue a MTC, certifying that the tubes supplied comply with this British Standard.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.